A: While many users report success, this tool is not officially supported by Hi Sharp. Use it at your own risk and always download from official app stores to minimize malware threats.
Select the page. A unique QR code or alphanumeric string will generate on the screen.
Once you have the USB drive ready, insert it into a USB port on the DVR. Power on the DVR and access the main menu. Navigate to the "Software Update" or "Upgrade" section, which is often found within the "System" or "Maintenance" settings. The system will detect the firmware file on the USB drive. Select the file, confirm the upgrade, and press the "Enter" button to start the process.
In some models, the administrator password might be set to 44444 by default, as indicated in some manuals. These default combinations are widely used across surveillance brands, including Hi Sharp. Additionally, for certain models, the password field may be left blank entirely, so attempting to log in without entering anything can sometimes be successful. If none of these work, you'll need to proceed to more advanced methods. hi sharp dvr reset password upd
Email the photo along with your purchase invoice to the official technical support department at sales@hisharp.com.tw . Specify your region, exact model number, and serial number in the text.
Enter this code exactly as written into the password field on your DVR.
Hi Sharp officially recommends a straightforward process for password recovery. This method is the most secure way to reset your password without losing your device's configuration. According to Hi Sharp's official support documentation, the process is as follows: A: While many users report success, this tool
on your motherboard if you can share a picture Find the latest firmware for your specific model Suggest security cameras that are easier to manage
. They can provide a one-day master code to bypass the lock. Learn more FAQ - Support | HI SHARP INTELLIGENCE
Keep your Hi Sharp DVR firmware updated to ensure the latest security patches are applied. A unique QR code or alphanumeric string will
Some Hi Sharp DVR models are equipped with a dedicated physical reset button. According to Hi Sharp's hardware documentation, the factory reset switch is a small button located on the left side of the NTSC/PAL shift switch on the back panel of certain DVRs. To perform the reset, you must power on the DVR. Immediately as the unit begins to boot up, press and hold the factory reset button. Continue holding it until an on-screen display (OSD) prompt that reads "Factory reset detected" appears. Once you see this message, you can release the button. The system will then complete its boot-up sequence, but all setup values will have been restored to their factory defaults. The username and password will then revert to the default combination (likely admin/123456).
In the field, try the following official manufacturer variations: