The DT50 uses geometric calculations to output the vertical height on the bottom line. 💾 Advanced Functions: Addition, Subtraction, and Memory Adding or Subtracting Measurements
Used by estimators to measure the height of a building or a high wall when direct access is blocked.
Never submerge the tool in water. Clean dust from the optical lens using a soft microfiber cloth or lens wipe to ensure the laser beam remains clear and uninterrupted.
Aim at the bottom baseline point of the target and press .
Maintenance: Keep the laser lens clean. Dust and fingerprints can scatter the beam and reduce accuracy. Use a soft microfiber cloth for cleaning.
Whether you’re setting up your DTAPE DT50 for the first time or troubleshooting a job, having the official user manual on hand makes all the difference.
Avoid measuring directly into bright sunlight or highly reflective mirrors. Calculation overflow
By default, measurements include the length of the device (rear reference). You can switch to the front reference if measuring from a specific edge.
It takes standard button cells. It’s not a power hog, but the screen turns off quickly to save power, which is good, though sometimes annoying if you are trying to copy a measurement down slowly.
