If you are upgrading, troubleshooting, or rebuilding a system with this motherboard, this comprehensive manual provides the exact technical specifications, pinout layouts, and configuration steps you need. 1. Technical Specifications Overview
Four DDR4 DIMM slots (288-pin). Supports up to 64GB (usually tested to 32GB by HP) of DDR4-2133 MHz memory. Expansion Slots: 1x PCIe x16 (for graphics cards). 1x PCIe x1 (for expansion cards). 1x M.2 socket 1, Key A (for Wi-Fi/Bluetooth cards). 1x M.2 socket 3, Key M (for SSDs).
The H170 chipset and LGA1151 socket officially support both 6th-gen (Skylake) and 7th-gen (Kaby Lake) processors. However, the HP IPM17-002 (Odense2-K) imposes further restrictions.
Typically 4-5 SATA 3.0 ports for hard drives or SSDs. USB 3.0 Headers: For front-panel USB ports. USB 2.0 Headers: For USB 2.0 expansion. ipm17-002 motherboard manual
desktop systems. While HP does not always provide a standalone retail manual, the following guide consolidates its key technical specifications and critical header pinouts. HP Support Community Core Specifications Form Factor: MicroATX (uATX). Intel H170.
Maximum Capacity: Up to 64GB (though HP officially tested and recommends up to 32GB). Speed: PC4-17000 (DDR4-2133). Expansion Slots: 1x PCI Express x16 (Gen 3.0). 1x M.2 socket 3, key M (typically for SSDs).
The IPM17-002 is an OEM (Original Equipment Manufacturer) motherboard, commonly manufactured by Pegatron or ECS for pre-built desktop systems, most notably from HP (often referred to as the "Odense" motherboard series). It is designed for budget to mid-range desktop builds and relies on a compact form factor. Core Technical Specifications Micro-ATX (uATX) If you are upgrading, troubleshooting, or rebuilding a
Remove the plastic jumper cap and bridge it across pins (Clear Mode). Wait 10 to 15 seconds . Move the cap back to pins 1-2 . Plug the power cord back in and power on the system. Clearing CMOS via Battery Removal If the jumper cap is missing or inaccessible: Disconnect all external power sources.
If you find a document titled "IPM17-002 User Guide," check the revision date. You want Rev 1.1 or later, as it corrects the SATA port mapping errors found in early printings.
motherboard, frequently referred to in HP community discussions as the "IPM17-002" or Odense2-K. HP Support Community Supports up to 64GB (usually tested to 32GB
A separate jumper is typically used to erase the power-on or setup password. MOBO Manual for Omen Motherboard IPM17-002
Before purchasing upgrades for your IPM17-002 system, verify hardware compatibility to avoid boot failures. CPU Support