Rok Power Washer Instructions New Official

Attach the high-pressure hose to the pump outlet and the other end to the trigger gun. Ensure all connections are hand-tight to prevent leaks.

If you have a petrol ROK model, only operate it outdoors in well-ventilated areas. Never run it inside a garage or shed. 2. Assembling Your New ROK Power Washer

Power washer unit, high-pressure hose, spray gun, lance/wand, nozzle set (0°, 15°, 40°, soap tip), garden hose adapter, and detergent tank (if equipped).

Assembly is relatively straightforward, and most users can complete it within 15-30 minutes. rok power washer instructions new

Pressure washers often come with color-coded nozzles. A 0-degree (red) nozzle is for stubborn stains on hard surfaces, while a 40-degree (white) nozzle is safer for windows or vehicles.

Switch back to a high-pressure nozzle (such as the Green 25° tip) to rinse the soap away, this time working from the top down. 7. Safe Shutdown Procedure

A plastic or brass fitting to connect your garden hose. User Manual & Spark Plug Wrench: (For petrol models). 2. Step-by-Step Assembly Instructions Attach the high-pressure hose to the pump outlet

) until a steady stream of water—without bubbles or sputtering—comes out of the nozzle. This can take up to 5 minutes for long hoses.

Never change nozzles while the gun is triggered or the motor is running. Always lock the gun (push the safety latch), swap nozzles, then unlock.

Pressure washers require a specific sequence of water connections to prevent air locks and pump damage. Connect the High-Pressure Hose Never run it inside a garage or shed

This is a low-pressure nozzle designed specifically to draw detergent from the onboard soap tank or siphon tube. It will not create high pressure.

Screw or click the gun holder into place.

Squeeze the trigger on the gun. The motor will start automatically. When you release the trigger, the motor will stop (it has an automatic Total Stop System). 4. How to Use Soap/Detergent

Locate the high-pressure water outlet on the machine (usually a threaded brass or silver fitting). Screw one end of the high-pressure hose onto this outlet.