Começando... 3, 2, 1
Começando... 3, 2, 1
Always save your configuration to the unit's memory. The software allows you to save and recall presets easily. Conclusion
Located on the rear panel. This is typically used for older control systems or permanent infrastructure wiring. Step 1: Download the Correct Software
Connect the square end of your USB cable (USB-B) into the front panel or rear panel USB port of the Ashly 4.8SP. Plug the flat end (USB-A) into an open port on your computer. Power on the Ashly 4.8SP unit. 2. Driver Verification software dlms ashly protea 48 install
Look inside the extracted setup folder for a subfolder named or USB Drivers .
To help tailor any further help with your setup, could you let me know: Which are you currently running? Are you connecting via USB or a serial/RS-232 cable ? Always save your configuration to the unit's memory
The software should automatically scan for connected Ashly devices. The 4.8SP will appear in the network tree on the left side of the screen, typically under an "Ashly" folder.
Connect the USB cable from the PC to the USB port on the front or rear of the 4.8SP. This is typically used for older control systems
Connect the USB cable to your PC and the front or rear USB port of the Ashly Protea 4.8SP. Power on the Ashly 4.8SP hardware unit.
The software will automatically scan for active devices. Connected units will appear highlighted in in the device list on the left side of the screen.