Xycd60 Manual -
Why readers should consult the manual
Long press the SET button for approximately 5 seconds to save your values and return to the main interface. Working Modes
The Xycd60 device comes with a range of innovative features and functions. Here are some of the key highlights:
Setting XY-CD60 controller at ISTA Breeze charge controllers
Time delay (0-999 seconds) before the relay acts. xycd60 manual
Sets the time duration for charging or discharging (00:00 - 99:59 hours).
You can set a specific duration for charging. If the voltage does not reach the upper limit within this time, the relay will automatically disconnect.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. XY-CD60 Charging and Discharging Manual | PDF - Scribd
Locate the sensor terminals (often labeled NTC , IN , or marked with a sensor icon). Why readers should consult the manual Long press
Up to 20A or 30A (Check variant details; standard models use 20A relays at 14VDC/125VDC, while the XY-CD63 upgrade handles up to 30A). Idle Operating Current: ~30mA Operating Temperature: -40°C to 85°C
The module features two core programmatic profiles. Selecting the right profile dictates how the physical relay responds to voltage changes. 1. Charging Control Mode ( IN )
This feature is rarely explained in the basic XYCD60 manual but is powerful:
Comprehensive Guide to the XY-CD60 Battery Charge/Discharge Controller Module Sets the time duration for charging or discharging
The unit features terminals for battery connection and charging/load connection.
) and opens (cuts off load) when the voltage falls to the lower limit ( 3. Setting Parameters To configure the module, use the following button sequence: Enter Setting Mode: Long press the Switch Parameters: Short press to cycle through parameters: (upper limit), (lower limit), and (time control). Adjust Values: buttons to increase or decrease values. Save and Exit: Long press for 5 seconds to save and return to the main interface. Switch Modes: Long press the button for 5 seconds to toggle between Charging ( ) and Discharging ( 4. Advanced Functions
The XYCD-60 features screw terminal blocks. Always disconnect power before wiring.
