Zd10-100 Datasheet -

Connect the other side to an Analog Pin of a microcontroller. Connect the same Analog Pin to a fixed resistor (e.g., ) leading to Ground (GND).

) sent to your Analog-to-Digital Converter (ADC) is calculated as follows:

is defined by its low mechanical profile and high material durability. Flexible Thin Film Pressure Sensor ZD10-100 - Flexniss

Once the "break force" (usually ~10-20g) is reached, resistance drops sharply. Power Law: zd10-100 datasheet

The sensor’s output resistance decreases non‑linearly as the applied force increases. The table below is taken directly from the official revision 2.2 datasheet:

While durable, exceeding the 500g range consistently can reduce the sensor's lifespan.

Capable of detecting small pressure changes, starting from roughly 50g, it is sensitive enough for precise human-machine interface applications. Connect the other side to an Analog Pin of a microcontroller

Flexible Thin Film Pressure Sensor. ZD10-100. Project. Size parameter. Product size. Thickness. Range. Response point. Durability. SENSOR+TEST

Touch-sensitive buttons, sliders, and bending detection. 5. Implementation Guide

: Pressure distribution testing and precise force measurement in compact environments. 5. Implementation Notes Flexible Thin Film Pressure Sensor ZD10-100 - Flexniss

The following technical data is compiled from representative ZD10-100 datasheets

: Designed for long-term use (over 1 million cycles) and is highly resistant to bending, making it suitable for curved surfaces.

This comprehensive datasheet guide breaks down the technical specifications, physical properties, operational behavior, and hardware integration methods for the Go to product viewer dialog for this item. 📋 Technical Specifications Overview The core performance data of the Go to product viewer dialog for this item.

For the best results, are you planning to use this sensor for a wearable device or a robotics project? Knowing this helps me advise on the best, most reliable calibration techniques. Share public link

The ZD10‑100 is a resistor‑type force sensor built on a flexible, waterproof substrate. It uses a proprietary nano‑pressure‑sensitive material printed on a thin, bendable film, which allows it to detect pressure with high sensitivity. Because the sensor is extremely thin and flexible, it can be integrated into curved surfaces, wearable devices, and other space‑constrained products where traditional rigid sensors cannot be used.