To switch the indoor temperature reading between Fahrenheit and Celsius, press the button located inside or near the battery compartment on the back of the clock. 12-Hour vs. 24-Hour Time
The Sharp Atomic Clock SPC373 has a built-in time zone setting. You can set the clock to display the time in one of the following time zones:
Press and hold the button on the back of the clock for approximately 3 seconds until the display digits begin flashing. sharp atomic clock spc373 user manual
The clock is showing the wrong hour, but the minutes are correct. Your time zone is set incorrectly.
Open the battery compartment cover on the back of the clock. To switch the indoor temperature reading between Fahrenheit
The Sharp SPC373 requires you to manually select your local time zone so it can apply the correct offset to the atomic time signal.
is a versatile digital clock featuring a contemporary, irregular silver design that functions as both a timekeeper and a thermometer. While it is generally praised for its large, easy-to-read display, some users find the initial setup and sensor maintenance to be technical. You can set the clock to display the
Use the (▲) or DOWN (▼) buttons to adjust the flashing value.
If the clock catches the signal, the tower icon stops flashing and stays solid. The time and date will automatically correct themselves.