Plug the power cord into a grounded 120V AC outlet. The ammeter needle will jump to indicate charging has started. Step 5: Monitor and Disconnect
Don't panic. The Autocraft AC60CR is a reliable, heavy-duty charger designed to bring dead batteries back to life. However, like any electrical device dealing with lead-acid batteries, using it incorrectly can be dangerous.
: If the meter reading is low, the battery may be nearly charged, or it might be a "sulfated" battery that requires more time to start accepting a charge. autocraft battery charger ac60cr manual free
Before plugging the unit into the wall, set the controls on the charger:
Connect the clamp to a heavy, unpainted metal part of the vehicle chassis or engine block (if the battery is still in the car). If the battery is outside the vehicle, connect it directly to the negative battery terminal. Step 4: Plug in the Charger Plug the power cord into a grounded 120V AC outlet
: Connect the Red (+) clamp to the positive battery terminal.
: Disconnect the charger. Feel the battery; if it is excessively hot or emitting a sulfur smell, it is damaged. Take the battery to an auto parts retailer to be load-tested. Issue: The charger does not turn on or show any lights. Cause : No AC power source or blown internal fuse. The Autocraft AC60CR is a reliable, heavy-duty charger
Disclaimer: This guide provides general information for Autocraft battery chargers. For specific technical details or unique features of your model, always prioritize the original manufacturer's instructions. The information in this article is for educational purposes and should not replace professional advice.
As Autocraft is a house brand, their official site may have digital copies.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
ԳրքաՄոլ
կայքի ստեղծումը և սպասարկումը՝ MAXARTS