Black Copper Pos P80 Driver Setup V7.17 Link | Pro — 2026 |

By default, it will be named "POS-80" or "Black Copper P80." You can leave this as-is or rename it to "Receipt Printer" for easier identification in your POS software. Step 5: Complete the Installation

Connect the BC-P80 to your computer via USB, Serial, or Ethernet. black copper pos p80 driver setup v7.17

Always test the communication between your PC and the printer immediately after setup. Open the Windows . By default, it will be named "POS-80" or "Black Copper P80

Click Add Port , select Standard TCP/IP Port , click New Port , and enter the specific static IP address assigned to your printer. Click Apply to save the changes. Step 5: Printing a Test Page Open the Windows

Click on or check the port selection options:

: Go to Printer Properties -> Ports tab. Check a different USB port checkbox (e.g., switch from USB001 to USB002 ), click Apply , and test printing again. Issue 3: Cash Drawer Fails to Pop Open After Printing