Copy the file to the localized boot flash file system, adjust the internal environmental system boot path parameters, and commit the configuration changes: Cisco 4500X switch upgradation issue
Expected Output: Should list any current SSH sessions.
verify /md5 flash:cat4500e-universalk9.spa.03.11.05.e.152-7.e5.bin cat4500e-universalk9.spa.03.11.05.e.152-7.e5.bin
Verify that your Supervisor engine has enough DRAM and Bootflash space to store and run the ~400-500MB .bin file.
Thanks to the universalk9 designation, the switch can handle high-grade encryption. This enables: Copy the file to the localized boot flash
On the 4500E chassis, this image supports and Non-Stop Forwarding (NSF) . If you have dual Supervisors, this software ensures that if the primary fails, the secondary takes over without dropping active data sessions. 3. Enhanced Security
write memory
Expected Output: Prompt for the password defined in the configuration.
Configure the switch to boot using the new software package upon its next reload cycle: This enables: On the 4500E chassis, this image
