Eberle Instat 6 User Manual English [top] ⚡ Fully Tested

Press the button once more. The weekday indicator (1 = Monday, 7 = Sunday) will flash.

The Instat+ 6 supports a 7-day schedule, a 5/2-day block schedule (Weekday/Weekend), or a 24-hour identical daily schedule. The default mode is usually 5/2-day. Setting the Weekly Schedule (5/2 Day Example)

Ensure the thermostat is set to "On" and that the requested temperature is higher than the room temperature. eberle instat 6 user manual english

Ensure the device is in mode and not locked in a manual override. Resetting the Device

The thermostat counts down the days and automatically restores your normal schedule upon your return. 6. Troubleshooting and Maintenance Common Error Codes and Solutions Symptom / Code Potential Cause Recommended Action Flat batteries or incorrect polarity. Replace with two new AA alkaline batteries. Flashing Battery Icon Low battery power. Replace batteries within 1-2 weeks to avoid system shutoff. Boiler Does Not Fire Press the button once more

The Instat 6 uses a menu-driven interface, typically controlled by four main buttons: . Setting the Clock:

: For the mains-powered variant, you must connect the Neutral line to the designated terminal. Omitting Neutral causes slow thermostat cycling. A normal system cycles 5 to 6 times per hour . Basic Operation and Modes The default mode is usually 5/2-day

Define the exact comfort temperature target for that specific active block. Save and repeat for remaining daily events. Troubleshooting and Maintenance Battery Replacement (INSTAT 6-2W) EBERLE - RS Online

Relocate the thermostat to an interior wall roughly 1.5 meters off the floor, away from external thermal interferences. A flame or radiator icon is visible, but radiators are cold

Live feed from the boiler or power source.