Vhm-314 Change Name New! Jun 2026

Power up the VHM-314 by connecting its 5V/GND pads to the adapter, or via its built-in Micro-USB/USB-C port. Click the "Read" or "Connect" button in the software. If successful, the software will populate fields showing the current configuration, including the name "VHM-314".

: You would need a CSR USB-SPI Programmer and software like CSR BlueSuite (PSTool). The Process :

Go to Bluetooth settings, connect to the VHM-314, tap the settings icon next to the device, and select "Rename."

Then, for the first time in two centuries, the emergency alarms did not sound. Archaic had no protocol for silence. Vhm-314 Change Name

Connect the adapter's to the board's RX and vice versa (if the board has exposed serial pads).

Similarly, the module’s is always “VHM‑314” regardless of the seller. Even when the same physical board is sold under a different brand name, its model designation does not change.

The most significant name change comes when a drug nears FDA or EMA approval. At that point, VHM-314 would receive a generic International Nonproprietary Name (INN)—e.g., “vhmizumib” or “trazadol-314”—followed by a brand name like “Neurivane.” This transformation from a lab code to a marketable identity is a rite of passage, indicating that the drug is real, safe, and ready for patients. Power up the VHM-314 by connecting its 5V/GND

Because the board does not feature an onboard USB-to-UART bridge chip (like a CH340 or CP2102), you cannot simply plug a standard micro-USB cable into a computer and open a terminal program to change the name. The onboard micro-USB port is strictly wired for power delivery (5V DC) and does not route data lines to the SoC on standard versions.

Turn your phone's Bluetooth off and on. Go to Bluetooth settings and click "Forget Device" on the old VHM-314 profile, then scan fresh. Conclusion

This method changes how the board appears . It does not affect how other people see the module when they scan for it. : You would need a CSR USB-SPI Programmer

Upon powering up, the JieLi chip will read the updated string from the EEPROM, displaying your custom name to pairing devices. Method 2: Reflashing the JieLi Chip (Firmware Modification)

For the scientific community, the transition can be frustrating. Researchers who published early mechanistic studies on VHM-314 must now update their references. Journals issue corrections, and databases like ClinicalTrials.gov reflect the new identifier. This temporary confusion is the price of progress.

Note: This rename only applies to that specific device. If you connect to another phone, it will appear as the original name again. Method 2: Advanced Approach - Firmware/Chip Modification

Use a serial monitor (like Arduino IDE or Putty) set to .