Press and hold the M. SET button for approximately 3 seconds . Adjust Time: Single Press: Advances the time by one minute.
If you are in an area with poor reception (like a basement or metal building), you can set the time yourself:
This is the automatic search mode; let the clock finish its initialization.
: If you notice the hands spinning randomly or the second hand moving in two-second jumps, it is time to replace the battery. MSF Radio Controlled Wall Clock - TLC Electrical Supplies ch899 chouchin radio controlled clock instructions free
: Briefly press the M. SET button to advance the time in one-minute increments .
If your clock has the "CH899WiFi" movement, it requires an internet connection to function. Here's how to set it up:
Q: Can I use my CH899 Chouchin radio controlled clock in other countries? A: Yes, but ensure you adjust the time zone setting accordingly. Press and hold the M
This is the standard method for initial use or after a battery change.
Unfortunately, I couldn't find a free, downloadable instruction manual for the CH899 Chouchin radio-controlled clock. However, these general guidelines should help you set up and use your clock.
Here's a step-by-step guide to setting up and using your CH899 Chouchin radio controlled clock: If you are in an area with poor
: If the clock is unresponsive, remove the battery and wait at least 10 seconds (or insert the battery backward for 10 seconds to clear the memory) before reinserting it correctly. Low Battery
Q: How do I reset my CH899 Chouchin radio controlled clock? A: Press and hold the "SET" button for 5 seconds to reset the clock to its default settings.
Q: How often does the CH899 Chouchin radio controlled clock synchronize with the atomic clock? A: The clock synchronizes with the atomic clock signal daily, usually at night.
A: Your clock may not have successfully received the radio signal. First, press the REC button to force a manual sync. If the issue persists, you may need to move your clock to a location with a stronger signal.
Place the clock on a windowsill facing toward the direction of your regional transmitter overnight. The atomic signal is strongest between 1:00 AM and 5:00 AM when atmospheric interference is lowest.