| Housing size (mm) | Cutout size (mm) | |------------------|------------------| | 48×48 | 45×45 |
| Parameter | Value | | :--- | :--- | | Power supply | 24V DC ±10%, 5A max | | Analog inputs | 4x universal (TC, RTD, 0-10V, 4-20mA) | | Control outputs | 2x relay (3A), 1x SSR (5V DC), 1x 0-10V | | Communication | RS-485 (Modbus RTU), USB-C (data only) | | Accuracy | ±0.1% of reading + 0.5°C (thermocouple) | | Operating temp | -10°C to +60°C | | Weight | 850g |
Remove the mounting brackets from the sides of the controller enclosure.
Routine preventative maintenance reduces unexpected downtime and extends the operating lifecycle of internal components. Daily Maintenance Wipe down the exterior casing with a dry microfiber cloth.
| Parameter | Value | |-----------|-------| | Input accuracy | ±0.1% of span + 1 digit | | Sampling rate | 10 Hz | | Relay outputs | 3x SPST, 3A @ 250VAC resistive | | SSR output | 24 VDC, 20 mA max | | Analog output (optional) | 0-10 VDC or 4-20 mA, 500Ω load | | Display | 2-line x 20 character VFD, adjustable brightness | | Power consumption | 12 VA max | | Operating altitude | Up to 2000 m (6560 ft) | | Agency approvals | UL 61010-1, CSA C22.2, EN 61326-1 | xmtk-9000 user manual
Analog input channels (supports 4-20mA, 0-10V, and RTD signals).
Sets the physical trip points for the auxiliary alarm contacts. 6. How to Run PID Auto-Tuning
4.2 Next scheduled review: Q1 2026
Compatible with various thermocouples (K, E, S, R, J, T, B) and RTDs (Pt100, Cu50). | Housing size (mm) | Cutout size (mm)
Check power cord seating. Try a different wall outlet. Verify the power brick LED is lit. System error or overheating.
The is an intelligent, microprocessor-based temperature controller primarily used in industrial settings like plastic pipe welding machines and hot melt adhesive systems. Its user manual provides critical guidance on safety, wiring, and PID (Proportional-Integral-Derivative) calibration to ensure precise thermal regulation within Core Functionality & Setup
: Its design integrates precision analog integrated circuits and dual-integral A/D converters, giving the instrument high accuracy and exceptional long-term stability.
When an operational anomaly occurs, the built-in diagnostic subsystem outputs a specific code on the main display screen. Error Code Reference | Parameter | Value | |-----------|-------| | Input
Programmable inputs supporting thermocouples (K, E, J, S) and thermal resistance sensors (Pt100, Cu50). Measurement Accuracy: ± 0.5% FS (Full Scale). Sampling Cycle: 0.5 seconds. Control Output:
is a (commonly 48x48mm, 48x96mm, or 96x96mm depending on the specific sub-model) designed for PID or ON/OFF control. Key Features:
Connect AC power to the supply terminals (85-264VAC). 3. Operation and Settings (Parameter Setting Mode)
Connect the AC live (L) and neutral (N) lines here. For DC models, observe correct polarity (+/-). Input Sensor Wiring
To access the full configuration menu: