Nokia 105 Rm 908 Usb Pinout Link
This is the round port visible on the bottom of the phone.
| | Charging | Data Transfer | Flashing / Repair | | :--- | :--- | :--- | :--- | | Capability | ✅ Standard Micro-USB | ❌ Not Supported | ✅ Requires FBUS | | Purpose | Charge the battery | Not applicable | Advanced operations | | Connection | Standard USB-A to Micro-USB cable | Not applicable | Specialized FBUS cable | | Required Hardware | Any standard USB charger | Not applicable | FBUS cable + Flashing box |
Finding the correct USB pinout for the Nokia 105 RM-908 is essential if you are trying to connect the phone to a computer for flashing or repair because this model does not have a standard USB charging port.
The USB port on the Nokia 105 RM-908 facilitates both power delivery and data transfer. If the physical port is damaged, technicians often use "jumpers" to connect directly to the motherboard pads. Pin Number Positive charging voltage from the USB adapter. Data - (D-) Negative data line for communication. Data + (D+) Positive data line for communication. Typically used to identify the connected device. GND (Ground) Negative/Ground return for the circuit. Common Repair Solutions Nokia 105 Rm 908 Usb Pinout
When looking at the phone's logic board with the Micro-USB port facing downward, the pins are laid out in a specific sequence. Standard Micro-USB ports have 5 pins.
If you are simply trying to repair the (to charge the battery) and not connect to a PC, you do not need the data pins. You only need to solder a new Micro-USB or USB-C female port to the VBUS and GND legs of the original charging connector block on the bottom of the phone.
| USB-A pin | Signal | Test point | |-----------|--------|-------------| | Pin 1 | +5V (VBUS) | TP3 | | Pin 2 | D- | TP2 | | Pin 3 | D+ | TP1 | | Pin 4 | GND | TP4 | This is the round port visible on the bottom of the phone
#Nokia105 #RM908 #MobileRepair #USB_Pinout #Flashing #GSMRepair #TechTips Nokia 105 user guide: Keys and parts - HMD
If your phone is not charging, it is likely a hardware issue related to the USB port. 1. No Charging (Connector Broken)
If the phone displays "Not Charging," the fault is usually in the "BSI" (Battery System Indicator) line, which is the middle pin on the battery connector, or the resistor network near the USB port. Important Safety and Technical Notes If the physical port is damaged, technicians often
:
remains a classic for its durability, but even the toughest phones eventually need a hardware fix. Whether you’re dealing with a charging failure or need to recover data from the motherboard, knowing the specific USB pinout is essential for successful mobile repairing The Nokia 105 RM-908 Pinout Guide
Follow these steps carefully to avoid permanently damaging the phone's logic board: Step 1: Prep the USB Cable
The Nokia 105 RM-908 is famous for broken micro-USB sockets due to mechanical stress. Here’s how to use the pinout to repair or bypass the port.
Below is the pinout mapping from a standard USB cable to the RM-908 motherboard test points: Motherboard Pin Label / Function USB Wire Color Standard USB Pin Function +5V Power Supply (Optional) GND (Ground) Ground Connection RX (Receive Data) Data Minus (D-) / Transmit from PC TX (Transmit Data) Data Plus (D+) / Receive to PC Critical Identification Tips
