6906 Software Update — Satlink Ws
Ensure the battery is charged to at least 70%, or keep it plugged into the wall charger.
Check your COM port assignment. Ensure you turn the Satlink device On only after clicking Start in the software. Upgrade Failed at 0%
Format a USB drive to FAT32 and copy the latest firmware file (e.g., upgrade.bin ) to the root directory. Execution: Insert the drive into the WS-6906 USB port. Navigate to the System or Tools menu on the device. Select Software Upgrade or USB Upgrade . Satlink Ws 6906 Software Update
Note: Ensure the firmware is compatible with your hardware revision to avoid "bricking" the device (rendering it inoperable). Method 1: PC Update via RS-232 (Recommended) This is the most reliable method for deep firmware changes.
: To trigger the update, you must often start the PC software first, click "Next" or "Start," and Ensure the battery is charged to at least
It is recommended to perform a "Factory Reset" from the system menu to clear old cache data.
Open the software on your PC. It is recommended to Run as Administrator on Windows 7, 8, or 10. Upgrade Failed at 0% Format a USB drive
Updating the software on your Satlink WS-6906 can improve device sensitivity toward certain satellites and update your satellite/transponder lists. There are two main methods to update this device: using a PC with an RS-232 cable or via a USB flash drive. Preparation
This method uses a serial connection to "flash" the firmware directly from your computer.