Caraflo V200 Shower Instructions Best -

Thank you for choosing the CaraFlo V200 thermostatic shower system. This guide covers the operation, safety features, and basic troubleshooting for your new unit.

Press the red button and turn the thermostat fully anti-clockwise to drain the hot side. caraflo v200 shower instructions

: Ensure your vehicle’s water pump is switched on at the main control panel and that there is sufficient water in your onboard tank or external supply. Activate the Water Heater Thank you for choosing the CaraFlo V200 thermostatic

Regulated by the handle on the left side of the valve body. : Ensure your vehicle’s water pump is switched

Remove the chrome cap from the end of the temperature handle, unscrew the retaining screw, and pull the handle off.

To keep your Caraflo V200 in top shape, routine maintenance is required—especially before the temperature drops. Cleaning the Showerhead

Insert the rubber sealing washers and the mesh debris filters into the inlet nuts of the shower valve. Note: Do not skip the mesh filters, as they protect the internal seals from damage. Step 3: Mount the Valve Body