| ST-Link Pin | Clone PCB Pin | |-------------|----------------| | 3.3V | VDD (3.3V pad) | | GND | GND | | SWDIO | SWDIO | | SWCLK | SWCLK |
Open your clone software package folder and look for the loader executable (typically named VCDSLoader.exe or VIIPlusLoader.exe depending on your chip architecture). Copy this loader file.
To repair and re-flash your clone interface back to life, use the following engineering process. Step 1: Identify the Internal Chipset
: If the device manager shows an orange exclamation mark, manually update the drivers by browsing to the "Drivers" folder within the VCDS installation directory. VCI Configuration vcds 2231 hex v2 clone repair install
If your interface shows or returns a "Not Found" or "Interface Not Found" error, the firmware may be corrupted or blocked.
Copy the clone loader file (usually VIIPlusLoader.exe ) into the C:\Ross-Tech\VCDS\ directory.
launch the VCDS software immediately and delete any shortcuts it created on the desktop. Loader Setup : Copy the VCDSLoader.exe | ST-Link Pin | Clone PCB Pin |
Temporarily disable Windows Real-Time Protection and any third-party security suites.
Contact the seller for a new loader file or a replacement cable if it is brand new. 3. Best Practices to Prevent Future Issues
During the installation process, a prompt will ask to install the USB drivers. Step 1: Identify the Internal Chipset : If
Here are the steps to set this up:
with NOPs or a jump to a routine that always returns 0x00 (success).
Connect the cable to your PC (do not connect it to the car's OBD-II port yet).