Recommendation
: Plug your interface cable into the OBD port, load the diagnostic software, and open 17 - Instruments . Access Adaptation : Click on Adaptation - 10 .
If the language ever changes again, you have a visual map to fix it without searching the internet again.
: If the language option is greyed out, ensure the vehicle is stationary and the ignition is fully on. how+on+rns+300+change+language+new
Once in the Settings menu, scroll down to find the language icon (usually represented by a speech bubble or the letters 'abc').
: Press the rotary knob inward to confirm the selection and open the language sub-menu.
Follow these steps exactly to navigate the menus, even if your screen is currently displaying a language you do not understand. Step 1: Access the System Setup Recommendation : Plug your interface cable into the
Press the MENU button to ensure you are in the main navigation/settings area. Step-by-Step: Changing the Language on RNS 300
Highlight your preferred language and push the rotary dial button once more to confirm. Fixing the "Insert Navigation CD" Loop
: If your vehicle has a "small" monochrome cluster display rather than the "big" MFD, you may not be able to change certain settings without a diagnostic tool like VCDS or OBDeleven . Summary of German-to-English Translations German Term English Equivalent Einstellungen Settings / Setup Sprache Hauptmenü Zurück : If the language option is greyed out,
: Scroll until you highlight "Language" (or "Sprache" ). Press the menu dial down to open the language repository.
Choose (often "Sprache") and select your new language.
He highlighted (or Englisch as it appeared in the German list) and pressed the checkmark or the "OK" button on the touchscreen.
: Turn on the unit and press the SETUP button located on the right or left side of the device faceplate.
Note: This works on firmware version 1.9.0 and above. If your unit does not beep, ignore this—stick to the standard rotary method above.