For a machine in regular use, drain and replace the gearbox oil once every 12 months. The drain plug is located at the lower base of the headstock casting. Manual Grease Points
Ensure the machine is securely anchored to the floor or workbench before use. Pre-Operation: Tighten all table and head locks before starting the motor.
High torque can instantly violently spin loose metal. Always secure workpieces using a heavy-duty drill press vise or table clamps. Strands S68 Drill Press Manual
Standard models within the CE area include a drill guard with a micro-switch. Power Machinery Australia Documentation & Resources Strands S68 Geared Head Drill - Newmac Equipment
The Ultimate Guide to the Strands S68 Drill Press: Operation, Maintenance, and Manual Insights For a machine in regular use, drain and
Loosen the column clamping levers. Use the mechanical hand crank to raise or lower the table via the rack-and-pinion system. Always lock the clamping levers tightly before drilling.
| Specification | Detail | |------------------------|-------------------------------| | | Bench-mounted drill press | | Drilling capacity (steel) | 16 mm (5/8”) | | Drilling capacity (cast iron) | 20 mm (13/16”) | | Spindle taper | MT2 (Morse Taper #2) | | Spindle travel (quill stroke) | 80 mm (3.15”) | | Number of speeds | 8 or 12 (depending on year) | | Speed range | 200 – 3000 RPM | | Table size | 250 x 250 mm (square) | | Table tilt | ±45° left/right | | Column diameter | 70 mm | | Overall height | 630 – 680 mm (excluding base) | | Motor power | 0.55 kW (3/4 HP) / 1 HP optional | | Weight | 55 kg (120 lbs) | Pre-Operation: Tighten all table and head locks before
Unlike light-duty, belt-driven workshop drill presses, the Strands S68 features a fully enclosed, oil-bath lubricated gear head. This design ensures maximum torque delivery at low speeds without the risk of belt slippage. Core Specifications
Use a high-quality ISO VG 68 or ISO VG 100 industrial gear oil (non-detergent, non-EP formula to protect any internal bronze components). Do not use standard automotive engine oil.
Approximately 240 kg to 290 kg (Bench vs. Floor model). Standard Speed Ranges (8 Speeds)