Disclaimer: Ensure your printer is connected via USB cable during this process. Wireless connection is not recommended for resetting.
While the is an essential tool for extending the life of a printer beyond its factory-set "end of service life," it should be used with caution. It is recommended to perform a physical inspection of the waste ink pads before performing a software reset.
Find the option under the maintenance section.
"Parts inside the printer are at the end of their service life." "Waste ink pad in the printer is saturated." epson adjustment program ver.1.0.6 47
: Ensure version 1.0.6 specifically supports your printer model (e.g., L120, L3110, etc.) before running it, as using the wrong version can lead to communication errors.
: Typically a simple, text-heavy GUI designed for Windows (XP through Windows 10/11).
Click and choose your printer model (e.g., L8050 or L8100) and port (USB). 3. Performing the Reset Click on Particular Adjustment Mode . Disclaimer: Ensure your printer is connected via USB
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | USB driver mismatch | Install Epson driver suite first. Use USB 2.0 port, not USB 3.0. | | Timeout Error (0x2E) | Printer busy or in wrong mode | Put printer in "Service Mode": Hold Stop+Power+Maintenance buttons. | | "Model Not Supported" | Wrong version selected | Double-check dropdown list. If your model is not listed, this version is incompatible. | | Counter Resets but Error Returns | Physical pad is saturated | Replace waste ink pad or physically clean the sponge and tubes. |
Epson printers are renowned for their reliability and high-quality output, particularly within the EcoTank series. However, like all inkjet printers, they are designed with a "waste ink pad" that collects excess ink during cleaning cycles and printing. Over time, this pad fills up, and the printer triggers a "Service Required" error, halting all operations.
This is the primary function. It clears the "Main Pad Counter" and "Platen Pad Counter" back to 0%, removing the "Service Required" block. It is recommended to perform a physical inspection
is a specialized firmware-level utility. Unlike standard printer drivers, this program communicates directly with the printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). Its primary function is to reset the waste ink counter to zero. It can also perform initial ink charging, head ID input, and other factory-level adjustments normally reserved for authorized service centers. The “47” in its version designation typically aligns with a specific series of Epson printers (e.g., Artisan 837, Workforce 845), indicating a precise hardware match.
Epson Adjustment Program Ver.1.0.6 47: A Comprehensive Guide to Resetting Your Printer