Delphiautocom Cdp 2017r3 On Win10 Mhh Auto Page 1 Work -

Select the patched FileActivation.xml file you generated in the previous step.

Assuming you have downloaded the required Cars 2017.R3.zip or Trucks 2017.R3.zip from MHH Auto, proceed as follows: 1. Installation

. You will likely see "Autocom USB" with a yellow exclamation mark. Right-click, select Update Driver , and manually point it to the folder inside your Delphi installation directory. 5. Firmware Update (Crucial) Open the Delphi software and go to Settings > Hardware Setup to ensure the PC sees the VCI.

Connect your Delphi CDP+ multiplexer to the Windows 10 PC using a USB cable. delphiautocom cdp 2017r3 on win10 mhh auto page 1 work

: Windows 10 digital driver enforcement sometimes blocks the modified FTDI drivers used by cloned CDP+ units. You may need to restart Windows 10 in "Disable Driver Signature Enforcement" mode to successfully link the VCI. AI responses may include mistakes. Learn more

Open the Delphi software, go to Settings > Hardware setup , click Test to verify connection, and then click Update to sync the device firmware with the 2017.R3 software version. ⚠️ Critical Troubleshooting for Windows 10

Getting the requires specific installation steps, driver configurations, and activation tweaks often discussed across automotive forums like MHH Auto. While newer operating systems sometimes struggle with legacy multi-plexer drivers, 2017.R3 remains a highly sought-after, stable version for standard OBD2 diagnostics, data logging, and component activation. Technical Specifications Requirement / Detail Software Version Autocom / Delphi 2017.R3 (Release 3) Supported Hardware Delphi CDP+, Autocom CDP , Multidiag Pro (Single/Dual PCB) Operating System Windows 10 (32-bit or 64-bit Architecture) Framework Dependency Microsoft .NET Framework 3.5 & 4.5+ Connection Types USB 2.0 or Bluetooth (Firmware dependent) Step-by-Step Installation Process 1. Environmental Preparation Select the patched FileActivation

The exact you are encountering during installation Whether you intend to use USB or Bluetooth connectivity

This is usually fixed by installing the "VC++ Redistributables" (2010, 2012, and 2013 versions). VCI Not Found:

Follow the manual driver update steps above. If the interface shows as unknown (Code 28), do not let Windows search automatically; force it to pick from the list and select "Autocom CDP+". You will likely see "Autocom USB" with a

If you are hunting through automotive forums like looking for answers on "Page 1" of the troubleshooting threads, this guide compiles the exact working steps, dependencies, and fixes required to get your diagnostic scanner up and running. Why 2017.R3 on Windows 10 is Tricky

Select your connection type () and click the Test button.

Plug your CDP+ Multiplexer into your computer via the USB cable and connect it to a vehicle's OBD2 port to provide 12V power.

: Return to the installation screen, select "Open/Load FileActivation.xml", choose the newly updated file, and let the software finalize the setup. Step 3: Install FTDI USB Drivers