Do not hold the scanner perfectly perpendicular to the barcode to avoid specular reflection.
Ensure the 35mm DIN rail is securely fastened to the backplate of an grounded metal enclosure.
: In standby mode, short-press the Camera button. The red light will flash once to confirm a photo has been captured .
The camera will automatically start recording when it detects movement. 2.6. Using IR Night Vision Ccd S820 Manual
Here are some tips and tricks that you can learn from the CCD S820 manual:
The red indicator light will blink exactly once and then return to a solid state. This confirms a 10-megapixel JPEG snapshot has been captured and written to memory. Powering Off
In Standby Mode, hold the (or center) button for 2 seconds. Red light flashes 3 times and turns off. Stop Recording Press the Trunk button briefly. Light returns to solid red. Take Photo In Standby Mode, press the Trunk (or top) button once. Light blinks once. Motion Detection Hold the Lock button for 3 seconds. Light flashes several times and turns off. Power Off Press and hold the Unlock button for 3 seconds. Light turns off. Technical Specifications Do not hold the scanner perfectly perpendicular to
Depending on the specific model variation, the third button may control Night Vision (IR LEDs) or Motion Detection Setup and Maintenance
Connect the device to your PC or Mac via USB. It will be recognized as a . You can then open the folders to view, move, or delete your AVI video files and JPEG photos. Setting the Date/Time Stamp To ensure your evidence is time-accurate: CCDS820 Keychain Camera Operating Instructions
Use a can of compressed air to blow away loose dust particles from the feed rollers and interior chassis. The red light will flash once to confirm
: Plug the device into your computer's USB port. It will appear as a "Removable Disk," allowing you to view, copy, or delete your .AVI video files and .JPG photos. Troubleshooting Tips
Slide off the back cover and insert a micro SD card into the slot. Ensure the contacts face the side with the buttons; push until it clicks.