The system will detect the USB drive. Click or Choose File and select your firmware update. Click the Start or Upgrade button.
Never update firmware during an active storm or when your power grid is unstable. If the DVR loses power mid-flash, the mainboard will be permanently corrupted. Use an Uninterruptible Power Supply (UPS) if available.
The XMeye platform has, in the past, faced security challenges related to automatic updates from the cloud. To ensure your network's safety, follow these secure practices: xmeye dvr firmware update
He pulled his phone out. The XMeye app was open, displaying the same twelve dead eyes. The cloud service was connected, but the local hardware was throwing a tantrum. He needed to get into the guts of the machine. He needed firmware.
If you‘re unsure about any step in the process, don‘t hesitate to contact your device’s technical support team. It‘s far better to ask for help than to risk permanently damaging your equipment with the wrong update. The system will detect the USB drive
You performed the – congratulations! But work isn't over. Many people forget to re-secure the device.
Use a smaller USB drive (16GB or less) and re-verify that it is formatted strictly to FAT32 . Try using the rear USB ports directly on the motherboard rather than front-panel ports. Post-Update Best Practices Never update firmware during an active storm or
This factory reset also resets the one true fix that users often miss: the P2P QR code. After an update, the cloud service (Xmeye’s p2p_client ) regenerates its device ID. The phone app will show the DVR as offline until the user rescans the newly generated QR code on the DVR’s local display. Many users abandon an otherwise successful update at this stage, assuming failure, when in reality the device is merely awaiting re-pairing.
Click the "Upgrade" button next to your device, select the unzipped firmware file, and initiate the upgrade. Troubleshooting XMeye Firmware Updates
There are two primary ways to flash the firmware onto your XMEye device. Method 1: Local Upgrade via USB Flash Drive (Safest)
The progress bar will fill up, and the DVR will automatically reboot when finished. Method 2: Remote Upgrade via Device Manage (CMS / VMS)