Hager Controls Bp 10140 Manual ◎

Verify that the "Power" LED on the device is lit, indicating bus connectivity. C. Mounting Snap the device onto the DIN rail.

A small slide switch or manual button on the face of the unit lets you bypass your automated routines on demand:

Ultimate Guide to the Hager Controls BP 10140: Manual, Installation, and Programming hager controls bp 10140 manual

Hager produces a wide variety of electrical devices, all supported by documentation bearing the "BP10140" mark. The table below categorizes the main product families you might own:

If your device matches one of these popular categories, use the official Hager Download Center to find its specific manual: Verify that the "Power" LED on the device

Installation must be performed by a qualified electrician to avoid risk of electrical shock. Always isolate the supply before working. Wiring Diagram Overview Mounting: Clip the timer onto the 35mm DIN rail. Supply (Line/Neutral): Connect Phase ( ) to Terminal 1 and Neutral ( ) to Terminal 2 to power the clock motor.

Ensure all switches share the same common terminal properly [1]. Configuration switch incorrect Check Dip Switch settings for proper operating mode. A small slide switch or manual button on

Manual functions: Includes a "menu" and "ok" button for setting time, date, and switching programs.

The information provided here is for general informational and educational purposes. Always refer to the official Hager documentation for your specific device revision. Electrical work should only be performed by qualified personnel.

Understanding the technical limits of your device ensures safe operation and prevents electrical overloads. 230V AC, 50/60 Hz Switching Capacity: 16A resistive load (250V AC) Memory Slots: Up to 56 program steps

Since many products list this address, you must find the (e.g., TJA470, EHN110, or TXM616) printed on the front or side of the unit. 2. Common Product Manuals from Hager Saverne