Ivoclar Programat P100 Manual English [LATEST]

Appears if the vacuum switch-off value exceeds the preset temperature.

Understanding the physical and technical parameters of the Programat P100 ensures safe installation and optimal performance.

Use the arrow keys to select the desired program (e.g., P1 for glaze, P2 for dentin).

Shows actual and setpoint values for temperature and vacuum. ivoclar programat p100 manual english

Clean the firing chamber regularly to remove condensation or ceramic dust.

Run an empty cycle up to 1050°C once a week to burn off carbon deposits and contaminants inside the insulation.

The Programat P100 allows technicians to customize firing parameters to match various ceramic systems, such as IPS Empress, IPS Classic, or conventional feldspathic porcelains. Structure of a Firing Program Appears if the vacuum switch-off value exceeds the

Check the main fuses near the power cord inlet. Verify outlet voltage. Leaky vacuum hose, worn O-ring, or failing vacuum pump.

Press the button. The furnace will close automatically and begin the cycle. Upon completion, the furnace will open automatically. 6. Maintenance and Cleaning

If a ceramic restoration fractures or explodes inside the chamber, allow the unit to cool down completely to room temperature. Carefully vacuum out the debris using a specialized HEPA vacuum filter to protect the delicate quartz lining. Never use compressed air to blow out the chamber. Shows actual and setpoint values for temperature and vacuum

Keep the furnace head interior free of debris. Use a soft brush.

The manual provides a detailed section on troubleshooting to handle common errors efficiently:

The is an automatic furnace designed for dental ceramic application. It is characterized by:

Clean lift rails. Lubricate mechanical components with approved dry lubricants.

To ensure a long service life, regular maintenance is required.