Right-click on the downloaded SP Driver V2.0 Install.rar file and select . Step 2: Run the Installer Open the extracted folder.
The (also known as the MTK USB VCOM Driver) is a crucial component for Windows users who need to flash firmware or repair smartphones powered by MediaTek (MTK) processors using the SP Flash Tool . This driver allows your computer to communicate with the phone’s bootloader (PreLoader) even when the device is powered off or in a "brick" state. 📂 Installation Guide for SP Driver V2.0
SP Driver V2.0 (Smartphone Driver Version 2.0) is a bundle of USB drivers designed specifically for MediaTek chipset architectures. It allows your Windows operating system to communicate with your phone in various modes. It is highly essential for: Flashing stock firmware using the SP Flash Tool. Bypassing FRP (Factory Reset Protection) locks. Recovering soft-bricked or bootlooping devices. Writing or repairing IMEI numbers. Prerequisites Before Installation SP Driver V2.0 Install.rar
| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | "Windows cannot verify the digital signature" | Driver signing enforcement | Disable via Advanced Startup (Shift+Restart → Troubleshoot → Startup Settings → Disable driver signature enforcement) | | "SP_Driver_V2.0_Setup.exe is not a valid Win32 application" | Corrupt download or partial extraction | Redownload the RAR and verify checksum. Use 7-Zip to extract. | | "Device descriptor request failed" | Faulty USB cable or port | Try USB 2.0 port, short high-quality cable. Also try powered USB hub. | | "Error 10: Device cannot start" | Conflicting older driver | Use USBDeview to remove all Spreadtrum entries, then reinstall V2.0 fresh. | | "S_BROM_CMD_STARTCMD_FAIL" in SP Flash Tool | Incorrect driver loaded | Manually force the driver to "SP Download Port" via Device Manager → Update driver → Let me pick from list. |
Use tools like WinRAR or 7-Zip to extract the contents of the .rar file into a new folder on your desktop. Step 2: Run the Installer Open the extracted folder. Locate the SP Driver V2.0.exe or Setup.exe file. Right-click on the downloaded SP Driver V2
This behavior is completely normal for MediaTek devices. The MTK VCOM port only activates for a brief 2 to 5-second window when a powered-off phone is plugged into the PC. If SP Flash Tool or your chosen servicing software is not actively waiting for the connection, the phone will exit flash mode and switch to battery charging mode. Always click or Start in your software before connecting the USB cable. Error Code 10 (Device Cannot Start)
Installing these drivers can be tricky because they often lack a standard "Next-Next-Finish" installer. Follow these steps for a manual installation: 1. Disable Driver Signature Enforcement (Windows 10/11) This driver allows your computer to communicate with
The "V2.0" designation typically indicates a second-generation driver set with improved stability, broader OS compatibility (Windows 7, 8, 10, and 11), and support for newer SP chipsets. The ".rar" extension means the files are compressed using WinRAR or equivalent decompression tools.
Your computer will finish booting into Windows normally, now prepared to accept the MTK drivers. Step-by-Step Installation Guide
: These archives are frequently used as bait to distribute trojans, adware, or credential stealers.
Follow these steps to ensure a successful connection between your device and your PC. Step 1: Extract the Archive