The program's primary use is to initialize (reset to 0%) the waste ink counters, which clearing the blinking red light error. Maintenance Features:
Snip the internal waste ink tube and redirect it outside the printer chassis into a small plastic bottle. This permanent modification eliminates the need to ever change internal pads again.
Service utilities are frequently flagged as false positives by Windows Defender or third-party antivirus software. Disable real-time protection during the reset process.
The information provided in this article is for educational purposes only. We do not encourage or support the use of pirated software or resetter tools. The Epson 1390 resetter provided in this article is a fixed solution that has been tested and verified to work with the Epson 1390 printer. However, we are not responsible for any damage or issues that may arise from using the resetter program. adjustment program epson 1390 resetter fixed
Finding your Epson 1390 stuck with blinking red lights is a classic "service required" headache. Usually, this means the internal waste ink pads are "full" according to the printer’s counter, even if the hardware is fine.
Purchase and install a fresh set of internal replacement foams.
, choose the "Stylus Photo 1390" model, and select the appropriate USB port. Enter Service Mode : Click on Particular Adjustment Mode Reset Counter Waste Ink Pad Counter , check the "Main Pad Counter" boxes, and click Initialization Power Cycle The program's primary use is to initialize (reset
: Connect the printer directly to your computer using a USB cable. Do not use Wi-Fi, ethernet, or USB hubs.
Connect the printer via (Wi-Fi/Network resets are unstable).
Click the button. The software will read your printer's memory and display the current point count and percentage (e.g., 100%). Ensure the Main pad counter box remains checked. Click the Initialization button to wipe the memory. Service utilities are frequently flagged as false positives
Follow these precise instructions to use the Epson 1390 Resetter. Step 1: Initialize the Software Open the extracted folder. Right-click on AdjProg.exe and select . Click the Select button at the top of the interface. Set the Model Name to Stylus Photo 1390 .
Some common solutions to fix issues with the Epson 1390 printer using an adjustment program include:
The 1390 groaned to life. The print head slid across the rail with a confident zip-zip . The red blinking lights stayed dark. Instead, a steady, calm green glow illuminated the "Power" button.
Q: What is the Epson 1390 adjustment program? A: The Epson 1390 adjustment program is a software tool used to reset the internal counters of the Epson 1390 printer.