After installation, check the following:
If your hardware ID points to Realtek, you need the Realtek Bluetooth Filter Driver package.
Look for a yellow exclamation mark next to or Unknown Device . Right-click the device and select Properties . Go to the Details tab. Click the drop-down menu and select Hardware Ids .
After your system reboots, confirm that the installation was successful: Open . bluetooth usb dongle 50 driver windows 7 32bit verified
If you previously plugged in an older Bluetooth dongle, open in the Control Panel. Uninstall any software named CSR Harmony , WIDCOMM , or Realtek Bluetooth . Restart your PC. 2. Install the Required Windows 7 Security Patches
If your hardware ID contains VID_0BDA , your dongle uses a Realtek chip.
: Many generic "CSR 5.0" dongles actually use older CSR8510 chips that mimic 5.0 features. After installation, check the following: If your hardware
Restart your computer after cleaning out old registry entries. Step 4: Install the Driver via Setup Wizard
Choose > Let me pick from a list of device drivers on my computer .
specifically provides a on the official TP-Link Support Page . Go to the Details tab
A: Yes – hash, digital signature, and real hardware testing confirm it works.
indicates a Realtek chipset (very common for Bluetooth 5.0 dongles like the RTL8761B). VID_0A5C indicates a Broadcom chipset.
