Audiolab 6000a Firmware Update Online

If you do proceed:

As of 2025, the latest stable version for the standard 6000A is v1.4.3 (though some special editions or later production runs have v2.0). The PlayStream network-enabled variant uses a different update path.

Power off the Audiolab 6000A using the physical power switch on the front panel.

1. Turn off unit (back switcher) 2. Push and hold power button. 3. Turn on unit (back switcher) 4. Release power button. Audio Science Review (ASR) Forum Firmware & Drivers - audiolab Audiolab 6000a Firmware Update

Look for the prefix on the version number:

While holding Standby, flip the back to "On" .

Turn off the amplifier using the main power switch on the rear panel. Press and hold the (Select) knob on the front panel. If you do proceed: As of 2025, the

: The process takes only a few seconds, and the device will automatically enter standby mode once finished. 3. Verification Power the unit back on normally.

Fix known bugs that may cause the unit to freeze or fail to save settings.

: Resolved an issue in version V0.30 where the Pre-Out would remain muted when waking the unit from Standby mode. Audiolab 6000a Firmware Update

Service-mode update (dealer/technician):

3 — Preparation checklist

Extract the downloaded Audiolab firmware ZIP file on your computer.