| Frequency | Task | Tools Required | | :--- | :--- | :--- | | | Check for condensate in the sight glass. Push the drain button. | None | | Weekly | Verify flow meter ball is floating at 0.8–1.2 L/min. Adjust needle valve if needed. | Flathead screwdriver | | Monthly | Remove the internal dust filter (under front cover). Wash with distilled water, air dry. | Hex key (3mm) | | Quarterly | Full zero & span calibration (see Part 5). | Calibration gases | | Annually | Replace the NDIR light source (factory service only). | Return to vendor |
The guide was written by a sadist. She held her breath.
Follow the on-screen prompts to accept the license agreement. methameasure user guide
Turn the pump ON and place a measuring cup under the dispensing nozzle.
: Navigate to the patient directory pane, click Add a New Patient , and type in their full name, date of birth, and unique identification number. | Frequency | Task | Tools Required |
The system will automatically print a label and update the Controlled Drug (CD) register.
Use the built-in Python console to write custom automation scripts for repetitive testing cycles. Adjust needle valve if needed
: Place a final clean cup under the nozzle and prime one last time to ensure no tiny air gaps remain. Pour this pure methadone back into your active stock container. 2. Daily Pump Calibration Protocols
Select your unit of measurement (e.g., millimeters, microns, or inches). Step 3: Map the Target Points