Connect the included Type-C to Type-C cable from the power bank's Type-C port directly to your laptop.
Charge the battery at least every 3 months if not in use to prevent deep discharge.
The BatPower ProE 2 is not a USB-C PD laptop power bank. It’s designed for laptops with magnetic MagSafe connectors (older MacBooks) or Surface charging ports. You would need a DC-to-USB-C converter accessory to charge modern USB-C laptops. batpower proe 2 user manual free
Do not use the jump-start function if the unit’s internal temperature is below -20°C (-4°F) or above 60°C (140°F).
Displays remaining battery capacity (typically 4 or 5 LED lights representing 20% or 25% increments). 2. Charging the ProE 2 Power Bank Connect the included Type-C to Type-C cable from
Typically 30,000mAh or higher, capable of charging laptops, tablets, and phones multiple times [1].
Use Google or DuckDuckGo with:
: The main port used to charge laptops (MacBook, Surface, etc.).
The LED indicator lights will flash, showing the charging progress. It’s designed for laptops with magnetic MagSafe connectors
: At 210Wh (or 56000mAh), this battery exceeds the standard 100Wh limit for most commercial airlines. Always check with your airline before traveling, as you may need special permission to carry it in your carry-on. Never put it in checked luggage. 6. Troubleshooting
Ensure you are using the original BatPower DC cable. Third-party cables often lack the gauge necessary to carry high wattage.