Dt-6507 Led Mirror Clock Instructions -

: Press MODE twice to see the temperature. You can often toggle between Celsius (°C) and Fahrenheit (°F) by pressing the UP button while in temperature mode .

Press once to save the choice; the Hour digits will flash. dt-6507 led mirror clock instructions

: Switches between display modes (Time, Date, Temperature, Alarm) and enters settings. : Press MODE twice to see the temperature

When the alarm rings, press the button. The alarm will pause, and the alarm indicator will flash, indicating snooze mode is active. The alarm will sound again after your pre-configured snooze duration ends. To shut the alarm off completely until the next day, press any button except SNZ/LIGHT. Temperature Unit Selection : Switches between display modes (Time, Date, Temperature,

The time reset itself after I unplugged the clock. What happened?

This is the most common user complaint. When the DT-6507 runs solely on AAA battery power, it enters an energy-saving mode and shuts off the LEDs after roughly 10–15 seconds. To keep the mirror display illuminated constantly, you must connect the clock to a live power source using the provided USB power cord.

A key feature of the DT-6507 is the automatic night mode. The clock will automatically dim its display during the evening and night hours (usually from 18:00 to 06:00) to prevent it from being a disturbance while you sleep. This is a fixed feature and does not require manual programming.