Adjusting internal counters without physically checking the hardware can cause ink overflow, damaging your printer and your property. Always ensure the ink pads are replaced or an external waste ink tank is installed if the counter is high.
When the counter hits 100%, the printer triggers a hardware lockout. The power light and ink/paper lights will flash alternately, and you will be unable to print, scan, or clean the heads.
If your printer's lights are blinking alternately and you see a "Service Required" message, your waste ink pads are full. reset epson l3211
The lights should stop flashing, indicating the ink level has been reset. Method 2: Through the Computer Driver Open on your Windows computer.
Check the boxes for (and any other available options like "Platen pad counter"). Click Check to see the current status. Click Initialize to reset the counters to zero. The power light and ink/paper lights will flash
A standard USB cable connecting the printer directly to the PC (do not use Wi-Fi or USB hubs for this process).
This indicates the Waste Ink Pad is full (requires the software reset above). Method 2: Through the Computer Driver Open on
Click the Select button at the top of the application window. Configure Settings: