If an accident occurs during application, the MSDS outlines these immediate steps:
Nitocote PE135 is a high-performance, eco-friendly protective coating widely used in the construction and civil engineering industries. Manufactured by Fosroc, this protective coating is based on a hydrophobic bitumen polymer emulsion. It is specifically designed to provide a robust barrier against water, groundwater chemicals, chloride ions, and sulfates.
According to standard GHS (Globally Harmonized System) classifications found in recent MSDS revisions, Nitocote PE135 is classified as under normal conditions of use. Risk Phrases
Nitrile or PVC gloves; long-sleeved overalls and protective boots to avoid skin staining and contact. nitocote pe135 msds
The Safety Data Sheet (SDS) for Nitocote PE135 outlines important health hazards and handling requirements: Eye Contact: May cause irritation or serious eye damage.
Miscible in water while liquid, meaning it can spread in water systems if spilled before curing.
Ensure you are referencing the most current version of the manufacturer's SDS provided directly by Fosroc or your authorized distributor. If an accident occurs during application, the MSDS
Low VOC (Volatile Organic Compounds), making it suitable for use in confined spaces or poorly ventilated areas compared to solvent-based alternatives. 2. Hazard Identification
Wear appropriate protective gear (gloves, boots, safety glasses) to prevent skin and eye contact. The spilled liquid creates a severe slip hazard.
Fill honeycombs, cracks, and structural defects with a suitable cementitious repair mortar (such as Renderoc) before coating application. Miscible in water while liquid, meaning it can
Clean tools immediately after use with water. If the product has begun to dry, a suitable solvent or mechanical cleaning may be required.
Do not eat, drink, or smoke while handling or applying the chemical. Wash hands thoroughly after use and before breaks. Storage Conditions Store in original, tightly sealed containers.
Nitocote PE135 must be disposed of in accordance with local, state, and national environmental regulations.
Remove contaminated clothing. Wash the skin thoroughly with soap and plenty of water. Do not use harsh industrial solvents to clean skin.
Ensure eye-wash stations are easily accessible near the application area.