G71 U(depth_of_cut) R(retract_amount) G71 P(start_block) Q(end_block) U(X_finishing_allowance) W(Z_finishing_allowance) F(feed_rate) Use code with caution. Radial depth of cut for each pass.
An important feature of the 0i‑TF Plus control is the optional software. This conversational programming interface allows operators to create part programs by filling in graphical forms rather than writing raw G‑code. The programming manual includes a section dedicated to Manual Guide i, covering its intuitive menus, modern graphical display, and how its animation features simplify complex programming steps. This function is particularly valuable for shops looking to reduce programming time on complex parts or for less experienced programmers. Manual Guide i can be used as a simplified CAD/CAM package, allowing programmers to use performance‑enhancing control features while keeping their machines operating.
The 0i-TF Plus combines classic FANUC reliability with the modern iHMI (intelligent Human Machine Interface). Key Interface Features fanuc series oitf plus programming manual
A CNC program is a sequence of blocks. Each block contains commands executed in order.
Additional offsets for multiple parts or fixtures. 3. Essential G-Codes and M-Codes Reference Manual Guide i can be used as a
The FANUC Series Oi‑TF Plus control is a powerful tool for modern CNC turning, but its full capabilities can only be unlocked with a thorough understanding of its programming language and operational logic. The official FANUC manual suite—comprising the Operator’s Manual, Programming Guide, Connection Manual, Parameter Manual, and Maintenance Manual—provides the complete roadmap for safe and efficient machine operation. Whether you are a novice operator learning the basics of G‑code, a seasoned programmer optimizing complex threading cycles, or a service engineer troubleshooting an alarm, these documents are your definitive reference. By investing the time to study the relevant manuals and keeping a copy of the programming guide near your machine, you can ensure that you are using the 0i‑TF Plus control to its fullest potential, achieving higher precision, reduced cycle times, and safer work practices.
To fully utilize the 0i-TF Plus, the programming manual should be used alongside several other official documents: For general operation and programming
For beginners, the best approach is to start with the (B‑64694). Read the safety section thoroughly and then work through the basic operation chapters to understand the control panel, screen layouts, and basic program loading. Once comfortable, move to the programming sections within the same manual or refer to the dedicated Lathe System Operator‘s Manual (B‑64604CM-1) for deeper programming topics.
To get the most out of your FANUC Series 0i-TF Plus programming manual, follow these industry best practices:
Macro programming works like traditional computer coding. It lets you build smart, adaptable logic directly into your CNC programs.
For general operation and programming, the key documents are the (Common to Lathe and Machining Center systems) and the specific Programming Guide that is embedded within the Operator’s Manual. The Connection Manual and Parameter Manual are more technical references, typically used by machine tool builders and service engineers.