Hp Deskjet 2300 All In One Printer Setup ^hot^ -

Once the software is installed, the printer will prompt you to align the cartridges to ensure optimal print quality. The printer will automatically print an . Lift the scanner lid.

Do not connect the USB cable until the software prompts you to do so. Method A: HP Smart App (Recommended) 123.hp.com or your device's app store to install the HP Smart app Add Printer : Open the app and select Add Printer plus (+) sign Connect USB

Launch HP Smart, click or the plus sign (+) , and select your HP DeskJet 2300 from the detected list. hp deskjet 2300 all in one printer setup

: Lower the cartridge access door, allowing the carriage to move to the center. Prepare and Insert

: Plug the power cord into the back of the printer and directly into an electrical outlet. Turn the printer on. Once the software is installed, the printer will

: Take the ink cartridges out of their plastic packaging. Carefully pull the pink plastic tab to remove the protective tape covering the nozzles. Avoid touching the gold-colored contacts or ink nozzles to prevent clogs and connection failures. Insert the Cartridges :

Choose the layout installation and agree to the software terms. Do not connect the USB cable until the

Push the cartridge forward until it clicks into place.

Unplug the USB cable from both ends and plug it back in firmly.

Place the alignment page on the right-front corner of the scanner glass. Close the scanner lid.